Promo® 1000 HP

Mit automatischer Regelung des Probenahmevolumenstroms durch die Aerosolsensoren welas® unter Überdruck von 2 bis 10 bar oder in Temperaturen bis 120 °C
Depending on the aerosol composition to be measured, i.e., the carrier gas component and the particle material, pressure and temperature changes in the carrier gas can significantly influence the particle size distribution, e.g., due to condensation or evaporation.

For this reason, the aerosol sensor welas ® 1100 HP and the aerosol sensor welas ® 1200 HP are equipped with a cuvette heatable up to 120 °C and pressure-tight up to 10 barg to ensure isobaric and isothermal sampling into the sensor's measurement volume.

The Promo® 1000 HP is usually calibrated for the operating volume flow. As the operating volume flow changes with pressure and temperature, it is advantageous for the user if automatic volume flow regulation for the sampling volume flow is provided for in the device.

In the Promo® 1000 HP, the pressure and temperature of the carrier gas are measured, and the required operating volume flow is automatically set to 5 l/min.

Includes:

  • Mass flow controller for volume flow regulation
  • Heating regulator up to 120 °C
  • Temperature sensor
  • Absolute pressure capsule
  • Filter unit to protect the flow rate control
Operation principle
Benefits

Your special advantages

  • Measuring range of 200 nm to 40 µm (3 measuring ranges selectable in one device)
  • Up to three measuring ranges in only one device:
    • 0.2 µm – 10 µm
    • 0.3 µm – 17 µm
    • 0.6 µm – 40 µm
  • Up to 128 size channels per measuring range
  • Concentration range from < 1 particle/cm3 to 5 • 105 particles/cm3
  • Calibration curves for different refractive indices
  • Very high and reproducible counting efficiency rate starting at 0.2 µm
  • High temporal resolution down to 10 ms
  • PDAnalyze analysis software
  • Calibration, cleaning and lamp replacement can all be performed independently by the customer
  • External control by RS 232 or Ethernet
  • Optional: Software PDControl for operation as welas® digital available
  • Simple operation
  • Low maintenance
  • Reliable function
  • Reduces your operating expenses
  • Applications

    Individual solutions for various industries

    • Separation efficiency determination of automotive cabin air filters, engine air filters, ambient air filters, compressed air filters, vacuum cleaner filters, cleanable filters, electrostatic precipitators, oil separators, cooling lubricant separators, wet separators, cyclones, and other separators
    • Isothermal and isobaric particle size and quantity determination, e.g., in the automotive, chemical, pharmaceutical, and food industries
    • Investigation of fast, transient processes
    • Particle measurement for cloud formation
    • Emission measurements
    Do you have any further questions?
    Please do not hesitate to contact us.
    Technical features

    In detail

    Measuring principle
    Optical light-scattering
    Measurement range (number C_N)
    < 5 • 105 particles/cm3
    Measurement range (size)
    0.2 – 10 µm, 0.3 – 17 µm, 0.6 – 40 µm
    Volume flow
    5 l/min, 1.6 l/min
    Size channels
    Max. 128 (64/decade)
    Time resolution
    ≤ 1 s
    Interfaces
    USB, Ethernet (LAN), Wi-Fi, RS-232/485
    User interface
    Touchscreen, 800 • 480 pixel, 7" (17.78 cm)
    Data logger storage
    4 GB Compact Flash
    Software
    PDControl, FTControl, PDAnalyze
    Thermodynamic conditions
    +10 – +120 °C, 2 – 10 barg
    Data acquisition
    Digital, 20 MHz processor, 256 raw data channels
    Light source
    Xenon high pressure lamp 75 W
    Housing
    Table housing, optional: with mounting brackets for rack-mounting
    Support options
    Direct remote access, Palas webserver service
    Operating system
    Windows embedded
    Power supply
    115 – 230 V, 50/60 Hz
    Power consumption
    100 W
    Installation conditions
    +5 – +40 °C (control unit)
    Dimensions
    185 • 450 • 315 mm (H • W • D) (19")
    Weight
    Control unit: approx. 8 kg, sensor: approx. 18 kg
    Downloads

    More information about Promo® 1000 HP

    Brief Description

    Brief product description in two-pages as PDF


    Product Description

    Detailed product description as PDF

    Shopping cart

    Your individual configuration

    Components


    (Art-No: 6079keine) - Promo 1000 Control Unit
    0,00


    (Art-No: 4591keine) - P-Module
    0,00


    (Art-No: 431keine)
    0,00


    (Art-No: 713keine) - Optional instruction at Palas
    0,00


    (Art-No: 5915keine) - System Calibration
    0,00

    0,00

    All prices without VAT. Price verification reserved.

    Total price (net)

    Contact us

    Options

    Options suitable for this device

    Service Spare Parts

    Receive updates on exciting products & valuable news!